SUPER PLASTIC SP01 COMING SOON
The Finest In Liquid Spray Coatings...
DESCRIPTION:
SP01 Super-Plastic is a polymer-ceramic hybrid coating. This coating can be modified very easily to fit a number of applications. It can be engineered with PTFE, SiO2, and nano-clays to enhance its properties to fit a particular need. SP01 is an ultra-high wear coating, with exceptionally high temperature resistance. It has very good coverage and is a high-build coating. SP01 Super-Plastic also has an ultra-low coefficient of friction. It can also be pigmented with a number of colors. SP01 Super-Plastic is a thermosetting plastic.
It provides aerospace, marine and automotive industries with materials to protect components from high temperatures, corrosion and wear.
TYPICAL USES:
Typical uses include the Marine industry for anti-wear and corrosion from salt water, Railroad tracks to protect tracks from oxidation, Automotive for friction reduction, and Aerospace for various applications.
APPLICATION:
Preparation: Parts to be coated should be clean and contaminant free. SP01 Super-Plastic can be applied directly to ground, cast, or highly machined surfaces. The best performance has been found on metal surfaces that have been media blasted so the surface has a random profile. Certain surface pre-treatments can further enhance the performance of the coating.
Application: SP01 Super-Plastic is specially formulated and supplied for use in a conventional air-spray gun, or via sponge brush. A spray booth is advisable. Make sure the working area is adequately ventilated and observe the usual precautions for spray painting. Keep the product well-mixed both in the gun reservoir and circulating to and from the spray nozzle. The surface should be coated as evenly as possible. A cured film thickness of 0.00075 to 0.002 inch (0.019 to 0.051 mm) is recommended. Stir well before and during use. Dipping is also an adequate method if uniformity is not essential.
Curing: Suggested cure times are: 30 minutes at 400°C/750°F or 60 minutes at 371°C/700°F. Actual curing time will vary with substrate size, mass, material, coating thickness, type of oven and many other factors.
Additional information: Because solids tend to settle rapidly, it is ideal to keep material agitated continuously. Keep container sealed to prevent hydrolysis and solvent loss.
SP01 Super-Plastic requires no dilution.
PACKAGING:
- SP01-G 1 Gallon Bottle (3.8L)
EXAMPLES:
