SOLID DRY FILM DIESEL GREEN GP04
The Finest In Liquid Spray Coatings...
DESCRIPTION:
GP04 corrosion resistance and anti friction coating is a specially formulated dispersion of solid lubricants in a solvent-based resin binder. It is supplied as a thick liquid suitable for conventional air-spray application. Once properly cured, it offers long-term resistance to gasoline, diesel, motor oils, acids and solvents. It also has excellent wear resistance with high load carrying capacity. Operating temperature: -70 to 280 C (-94 to 480 F). This coating is designed as a diesel exhaust pathway protectant coating with excellent anti-porosity properties.
TYPICAL USES:
GP04 coating is designed to be applied to EGR system components on diesel trucks to provide corrosion protection. It is ideal as a long term lubricating film on piston skirts, intake manifolds, pneumatic or hydraulic systems and any other application that requires reduced friction and corrosion protection during operation.
APPLICATION:
Preparation: Parts to be coated should be clean and contaminant free. GP04 can be applied directly to ground, cast, or highly machined surfaces. It is possible to apply the coating on metal surfaces that have been media blasted so the surface has a random profile. Certain surface pre-treatments can further enhance the performance of the coating.
Application: GP04 is specially formulated and supplied for use in a conventional air-spray gun. A spray booth is advisable. Make sure the working area is adequately ventilated and observe the usual precautions for spray painting. Keep the product well-mixed both in the gun reservoir and circulating to and from the spray nozzle. The surface should be coated as evenly as possible. A cured film thickness of 0.00075 to 0.002 inch (0.019 to 0.051 mm) is recommended. Stir well before and during use. Dipping is also an adequate method if uniformity is not essential.
Curing: Suggested cure times are 30 minutes at 205 C/ 400 F or 60 minutes at 180 C/ 356 F. actual curing time will vary with substrate size, mass, material, coating thickness, type of oven and other possible factors.
Additional information: Because solids tend to settle rapidly, it is ideal to keep material agitated continuously. Keep container sealed to prevent hydrolysis and solvent loss.
GP04 requires no dilution before use unless solvent has been lost to evaporation. If so, additional solvent may be added to restore original viscosity.
PACKAGING:
- GP04-G 1 Gallon Bottle (3.8L) - larger sizes are available upon request.
Please call 801-872-7976 or email us today to discuss quoting your parts to be coated in facility, licensing the coating to spray in your own facility, or purchasing the coating and training a facility in your area. We can coat sample parts, drawings and EAU's are necessary for an accurate quote.
EXAMPLES:
